Legris Liquifit Fittings

Introducing LIQUIfit™

From the Trusted Inventor of the Instant Fitting

With over 40 years of experience, Legris now presents a range of leak-free, instant fittings in a bio- based compact body.

LIQUIfit™ offers:

• Optimum performance suitable for contact with water, beverages and food
• The most compact profile on the market
• 100% bio-based body and thread
• EPDM patented sealing technology
• Full flow
• No pumping effect
• No need for locking clip or tube insert
• Minimized internal retention
• Immediate sealing on threads

Advantages of the LIQUIfit™ Range

Comprehensive range of products.

• Parker Legris "Advanced PE" tubing
• 9 colours (clear, red, blue, black, green, yellow, purple, orange, natural)
• Inch sizes 5/32", 1/4", 5/16", 3/8", 1/2"
• Metric sizes 4, 6, 8, 10, 12 mm

2 colours for fittings.

Optimal sealing

• Quality control and date coding
• Automatic sealing: the D seal within the fitting provides a positive seal on the O.D. of the tube, in both static and dynamic positions, due to an optimized design of the fitting cavity.

High performance materials

• Suitable for: water, beverages, CO2.
• High chemical resistance (chlorine, cleaning agents, UV).
• Approved quality for contact with food (FDA, NSF 61, 51, ACS)
• Mechanical resistance over time

Renewable bio-based material

• The LIQUIfit™ body is manufactured from a unique bio-based high performance polymer produced from renewable plants, to expand the use of non-fossil-based resources.
• CO2 emissions are divided by 5 compared to classic polymer fittings.

Innovative technology (patented)

• Instant connection/disconnection
• The much reduced movement of the LIQUIfit™ gripping system prevents any pumping effect 
• No tube insert or locking clip required at any working temperature (with Parker-Legris Advanced PE Tubing)
• Advanced gripping design allows a tight bend radius without leaks
• Can be used with prepared metallic tubing (please consult Parker-Legris’ technical department for the groove dimensions)

Please visit www.arvihitech.com for more details.

For Enquiry, please email to sales@arvihitech.co.in

Arvi Hitech
http://www.arvihitech.com

Parker A-Lok Fittings

Introduction

Parker CPI™ / A-LOK® Instrumentation Tube Fittings are designed as leak-free connections for process, power and instrumentation applications. These single and two ferrule fittings are manufactured to the highest quality standards and are available in a broad range of sizes, materials and configurations.

Features

The Parker CPI™ / A-LOK® tube fitting has been specifically designed for use on instrumentation, process and control systems, analysers and environmental equipment employed in chemical, petroleum, power generating and pulp and paper plants. CPI™ / A-LOK® fittings have also been used extensively in other applications and industries wherever high reliability and quality are required.

Materials

Parker CPI™ / A-LOK® fittings are available as standard in Heat Code Traceable, 316 stainless steel. Other materials include steel, brass, aluminum, nickel-copper, Hastelloy C®, Alloy 600, Titanium, 6Mo, Incoloy 625 and 825. Straight fittings are machined from cold finished bar stock and shaped bodies are machined from close grain forgings. The raw materials used fully conform to the chemical requirements listed in Specification Table 1 found on page 6. For nuclear and other critical applications, stainless steel CPI™ / A-LOK® fittings are readily available with documented heat code traceability.

Pipe Fittings/Adapters

Parker CPI™ / A-LOK® tube fittings are available in combination with a variety of ISO and ANSI pipe thread configurations. For a full listing of these fittings, see Catalog 4260.

Tubing

Parker CPI™ / A-LOK® tube fittings can be used with a wide variety of tubing materials and a broad range of tube wall thicknesses. CPI™ / A-LOK® seals equally well on both thin wall and heavy wall tubing. Tubing and fitting materials should be selected to be compatible with the fluid media. Due to thermal expansion characteristics and chemical stability, the tubing should be of the same material as the fitting. (The exception is brass fittings and copper tubing.)

Torque

Parker CPI™ / A-LOK® tube fittings do not twist the tubing during installation. CPI™ / A-LOK® ferrule designs assure that all make and remake motion is transmitted axially to the tubing. Since no radial movement of the tubing occurs, the tubing is not stressed. The mechanical integrity of the tubing is maintained.

No Distortion

In make-up, there is no undue force in an outward direction to distort the fitting body or ferrules to cause interference between the ferrules and nut. This assures that the nut will back-off freely for disassembly and permits a greater number of easy remakes.

Sealing

Positive, reliable connections with Parker CPI™/ A-LOK® fittings have been qualified by exhaustive tests and over four decades of experience in the manufacture of quality tube fittings.

Please click the below link to download the catalogue.

http://issuu.com/manojkumar7/docs/a-lok_fittings